Home > Taylor > 700 Series > Model 794 > Taylor 794 Service Manual and Parts Diagram

Exploded Parts Views and Service Manual for the Taylor 794 Soft Serve Machine

Service manual, catalog, mechanical drawings of parts, and parts list for the Taylor 794 soft serve machine. FrozenYogurtParts.com is your source for all your ice cream machine and frozen yogurt or soft serve needs.

If you don't see a part listed, need help identifying a part, or any other help call us today at 1-800-788-0808

Service Manual

Download the Taylor 794 Service Manual

Parts List and Part Numbers

View all Taylor 794 soft serve machine parts for sale

Item	Description	Part No.
1	Cover–Hopper–14 QT	041682–GRY
2	Pan–Drip 19 1/2 Long	035034
3	Tube A.–Feed	X29429–2
4	Panel–Rear	041855
5	Panel–Side *Left	068691
6	Panel–Side *Right	068692
7	Panel–Service	064000
8	Shield–Splash	022765
9	Tray–Drip	021057
10	Caster–4” SWV 5/8 Stem	018794
11	Adaptor A.–Caster	X18915
12	Caster–4” SWV 5/8 Stem W/Brake	034081
13	Stud–Nose Cone	022822
14	O–Ring–3/8 OD X .070W	016137
15	O–Ring–.643 OD X .077W	018572
16	Orifice	022465–100
17	Panel A.–Front	X41820–SP3

Item	Description	Part No.
1	Door A.–3 Spout	X51532–12
1a	Baffle A.–Long 4 IN	X50882
2	Decal–Door–3 Spout	021521
3	Valve A.–Draw	X69539
4	O–Ring–7/8 OD X .103W–SIL	083693
5	Cap–Design 1.010" ID–6 Point	014218
6	Plug–Prime	028805
7	O–Ring–3/8 OD X .070W	016137
8	Handle A.–Draw *White	X81010–SP
8a	Handle–Draw–White	056248–1
8b	Screw–ADJ.–5/16–24	056332
8c	O–Ring–1/4 OD X .070W 50	015872
9	Nut–Stud *Long	034382
10	Nut–Stud *Short	034383
11	Rod A.–Pivot	X20683
12	O–Ring–5/16 OD X .070W	016272
13	Gasket–Door HT 4"–Double	048926
14	Bearing–Front	050216
15	Beater A.–3.4QT–Helicore	X31761
16	Blade–Scraper–Plastic	035174
17	Shaft–Beater	032564
18	Seal–Drive Shaft	032560

Sort By:

Page of 1

Feed Tube O-ring for Taylor Soft Serve Machines (8 Pack) - 043758-F8

Product Description
043758-F8 (8 pack) Composed of high grade FDA-approved polymer to help maximize lifespan. Compatible with Part #: Taylor 043758.

Product Use
The draw valve o-ring creates a seal for the draw valve, which helps prevent any product leaking.

How Do I Know When To Replace This Part
Inspect draw valve o-ring for any cracking, tearing, or deterioration of product.

Recommended Replacement Schedule
Taylor recommends that you replace this part every three (3) months or when you notice wear or failure.

Fits The Following Taylor Soft Serve Machine Models
142, 150, 152, 161, 336, 338, 339, 632, 750, 751, 754, 774, 791, 794, 8752, 8756, C606, C706, C707, C708, C709, C712, C713, C716, C717, C722/C722 ADA, and C723/C723 ADA machines

List Price: $9.75

Sale Price: $2.69

Savings: $7.06